Optika Italy B-510 Serie Manual De Instrucciones página 22

Polygon
Curve
Scale Bar
Arrow
Execute Calibration to determine the corresponding relation between magnification and resolution,
which will establish the corresponding relationship between measurement unit and the sensor pixel
size. Calibration needs to be done with the help of a micrometer. For detailed steps of carrying out
Calibration please refer to chapter 9.3.
Export the Measurement to CSV file(*.csv)
Measurement Setup
Delete All the Measurement Objects
Exit from Measurement mode
When the measurement ends, left-click on a single measuring object and the Object Location & Prop-
erties Control Bar will show up. User could move the object by dragging the object with the mouse.
But more accurate movement could be done with the control bar. The icons on the control bar mean
Move Left, Move Right, Move Up, Move Down, Color Adjustment and Delete.
Note:
1. When user left-clicks Display/Hide
Control Panel will not pop up automatically even if moving the mouse cursor to the left edge of the video window. Only
when user left-click the
perform other operations on the Camera Control Panel or on the Camera Control Toolbar.
2. When a specific item is selected during the measurement process, the Object Location & Attributes Control Bar
button on the Measurement Toolbar, it will be fixed. In this case the Camera
button on the Measurement Toolbar to exit from the measurement mode it will be possible to
will appear for changing the object location and properties of the selected objects.
Page 22