Optika Italy B-510 Serie Manual De Instrucciones página 26

12.4.2 Setting > Magnification
Name
Resolution
Clear All
Delete
Up
Down
Fig. 31 - Magnification Settings Page
The name of the Magnification, usually the Magnification of the microscope objective is used
as the Magnification name when calibrating, such as 4X, 10X, 40X,100X, etc. Besides, other
user-defined information could be added into the Magnification name too, for example, micro-
scope model, operator name, etc.
Pixels per meter. Devices like microscopes have high resolution value.
Click the Clear All button will clear the calibrated magnifications and resolutions.
Click Delete to delete the selected item for specific resolution.
Click Move Up to move up the selected Magnification.
Click Move Down to move down the selected Magnification.
Page 26