Serial 1 MTN Manual Del Propietário página 15

11. Install pedals
o The end of each pedal is marked
with either an "L" or "R",
indicating the side of the bike as
seen by the rider when seated on
the bike.
o The Left pedal has 3 lines on the
pedal spindle. The Right pedal
spindle is smooth.
o The Left pedal is reverse
threaded, or left-hand threaded.
Tighten using multi-tool. Finalize
o
tightening with a pedal wrench
(not supplied) to 35Nm
12. Install bell
o Disassemble using multi-tool
Wrap inner sleeve around
o
handlebar to the right of the right
brake handle
Wrap bell around inner sleeve,
o
tighten screw using multi-tool
11