Safety Label; Grounding Instructions; Warning Label - - Tennant EX-SC-1020P Manual Del Operario

OPERATION
EN
4. Before leaving or servicing machine:
- - Turn off machine.
- - Unplug cord from wall outlet.
5. When servicing machine:
- - Unplug cord from wall outlet.
- - Avoid moving parts. Do not wear loose
jackets, shirts, or sleeves.
- - Do not power spray or hose off machine.
Electrical malfunction may occur.
- - Use manufacturer supplied or approved
replacement parts.
- - All repairs must be performed by a
qualified service person.
- - Do not modify the machine from its original
design.
6. When transporting machine:
- - Get assistance when lifting machine.
- - Unplug cord from wall outlet.
- - Use tie- -down straps to secure machine to
truck or trailer.

SAFETY LABEL

The safety label appears on the machine in the location indicated. Replace label if it is missing or becomes damaged
or illegible.
4
Home Find... Go To..

GROUNDING INSTRUCTIONS

Machine must be grounded. If it should
malfunction or breakdown, grounding provides a
path of least resistance for electrical current to
reduce the risk of electrical shock. This machine is
equipped with a cord having an
equipment- -grounding conductor and grounding
plug. The plug must be plugged into an
appropriate outlet that is properly installed in
accordance with all local codes and ordinances.
Do not remove ground pin; if missing, replace plug
before use.
Grounded
3 Hole Outlet
Ground Pin
WARNING LABEL - - Located on backside of
control console.
EX- -SC- -1020P (04- -10)