Noaton FORNAX Manual De Instrucciones página 25

1 IMPORTANT PRECAUTIONS
Before using this ceiling fan with lighting, read these instructions carefully and follow them exactly.
1. Input voltage of this product: 220 V-240 V/50 Hz
2. If you do not have sufficient knowledge of electrical equipment, hire an experienced professional
to install it.
3. Before installing and removing the ceiling fan, turn off the power first. Installation must be
done in this order: ground wire, phase, neutral wire. Before disassembly, the neutral wire,
phase, and ground wire must be removed in the order: neutral wire, phase, and ground wire
to prevent electric shock.
4. The ceiling fan must be installed on a fixed ceiling and the ceiling fan location must be able
to support a weight greater than 60 KG.
5. All screws must be securely fastened when installing the ceiling fan.
6. The blade angle and elevation are determined after many repeated measurements, so
they cannot be changed arbitrarily. Special care must be taken when installing the blade to
avoid collision. If the blade angle and elevation are deformed, the ceiling fan will vibrate.
2 TOOLS REQUIRED
10 mm Allen key
(for mounting on
concrete)
3 INSTALLATION AND INSTRUCTIONS
Contents of the package
-
Before installing the ceiling fan, please check that the following accessories are
-
included in the box. If nothing is missing, you can install it.
1x Mounting
plate
1x Board + LED
Phillips
Flat head
screwdriver
screwdriver
1x Motor
1x Cover
1x Shade
1x Screw set +
1x balancing kit
25
Impact drill (for
Telescopic
mounting on
ladder
concrete)
1x Instructions
1x Remote control
1x Receiver
2x AAA batteries
3x Blades
EN