Dometic COOLAIR RTX 1000 Instrucciones De Montaje página 9

CoolAir
6 Accessories
Available as accessories (not included in the scope of delivery):
Part designation
RTX 24 V: Connection cable 6 mm² x 11 m
RTX 24 V: Electrical fuse connection set RTX
RTX 12 V: Electrical connection set
7 Installation
!
CAUTION!
Incorrect installation of the parking cooler may place the safety of the user at
risk.
The manufacturer accepts no liability whatsoever for personal injury or property
damage if the parking cooler is not installed according to this installation
manual.
A
NOTICE! Damage hazard
• The parking cooler may only be installed by qualified personnel from a
specialist company. The following information is intended for technicians
who are familiar with the guidelines and safety precautions to be applied.
• The manufacturer only assumes liability for parts included in the scope of
delivery. The validity of the warranty expires if the device is installed
together with third-party parts.
• Check whether the roof of the vehicle is able to support the weight of a
person before climbing onto it. Ask the vehicle manufacturer about the
permitted roof loads.
7.1 Notes on installation
The following tips and guidance should be followed when installing the parking
cooler:
!
WARNING! Electrical shock
Before carrying out any work on electrically operated components, make sure
that they are disconnected from the power supply.
Before installing the parking cooler, disconnect all connections to the vehicle
battery.
• Before installing the parking cooler, check whether any vehicle components
could be damaged or have their function impaired as a result of the installa-
tion.
Check the dimensions of the system to be installed (fig. 2).
The dotted line indicates the middle of the roof hatch opening.
EN
Accessories
Ref. no.
9100300108
9100300110
9620001663
9