Descargar Imprimir esta página

Jocel JFE38-011176 Manual De Instrucciones página 19

Publicidad

Idiomas disponibles

Idiomas disponibles

CAUTIONS
1. Read all of the instructions and save them for reference.
2. To protect against any electrical hazards. Do not place unit or cord in water or
any other liquids.
3. Do not touch any hot surfaces. Use oven mitts for removing or touching any hot
parts. Always place Oven on heat protected surface.
4. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
5. Leave about 50mm open space all around the exterior of this appliance. Place
the appliance on a dry, horizontal surface.
6. UNPLUG the unit when not in use and before cleaning. Always allow to cool
before attaching or removing any parts.
7. Do not use any accessories other than the ones provided with this product.
8. Always put the plug out from the wall-never pull the cord. Remove the plug from
the wall before moving the appliance. Use both hands to move the appliance.
9. Do not place the Oven near a hot flame or electric burner.
10. Do not operate this appliance if the cord or plug is damaged. Contact the
Technical Assistance.
11. Do not operate this appliance outdoors.
12. Use this appliance only for its intended use and use extreme caution when
removing the tray, as it may contain hot grease.
13. Do not damage, over bend, over stretch the power code. Do not put heavy items
on code or clip the code.
14. Store only the accessories provided with this unit inside the oven. Do not store
any other materials.
15. A fire may occur if the appliance is covered or touching flammable material when
operate. Do not put any items on top of the appliance when in operation.
16. Do not place any cardboard, paper or plastic inside the oven.
17. In order to switch off this appliance, rotate the Timer to "0" position and then
remove plug from wall outlet.
-18-

Publicidad

loading