Master MT Pocket Manual De Uso Y Mantenimiento página 25

How to use the machine
Once assembled and connected to the electricity supply, the machine is ready to be used.
IMPORTANT: The use of ear and eye protectors is recommended.
Put a safety glove on the hand that will be used to hold the branch to be treated, and with the other, press the on/off switch to turn on the
1
machine. Leave the switch in the ON position.
Take a freshly harvested branch and slide it over the grid in "zig-zag" movements.
2
3 Once flowers have been cut as desired, remove the branch.
Repeat the process with a new branch.
4
Once the work session is finished, turn off the machine by pressing the on/off switch to leave it in the OFF state.
5
Removing material from the bag
First, press the ON/OFF switch on the machine to turn it off.
1
Then disconnect it from the electrical current by unplugging it.
IMPORTANT: The machine must be stopped and disconnected
before manipulating it.
Remove and empty the contents of the bag. The bag can be washed in the washing machine, or by soaking it with the Master Clean liquid
3
from the cleaning kit and scrubbing it by hand.
Once the cleaning operations have been carried out, replace the bag by reversing the previous steps.
4
IMPORTANT: NEVER remove the protective grid from the blades until the blade movement has stopped.
Open the Velcro fastener on the collection bag and remove it.
2
www.masterproducts.es
25