Descargar Imprimir esta página

Listo RML50-50b2 Manual De Instrucciones página 15

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

t
emperature indicator
To help you set your appliance correctly, the refrigerator is equipped with
a temperature indicator (located in the coldest zone and indicated by the
pictogram opposite).
For proper food storage in your refrigerator and particularly in the coldest zone, make sure the
temperature indicator shows OK. If OK does not appear, the average temperature of the zone
is too high. Set the thermostat to a higher position.
Whenever you change the thermostat, wait for the temperature inside the appliance to stabilize
before proceeding to a new setting if necessary. Only change the position of the thermostat
gradually and wait at least 12 hours before checking again and possibly changing it.
NOTE : after loading the appliance with fresh food or after opening the door repeatedly (or
leaving it open for a prolonged period), it is normal if the word "OK" does not appear in the
temperature indicator; Wait at least 12 hours before readjusting the thermostat.
If the refrigerator compartment evaporator (back wall of the appliance) becomes covered
in frost (appliance with excessive load, high room temperature, high thermostat setting,
frequent door openings), gradually turn the thermostat knob back to a lower position until the
compressor stops fairly regularly.
s
t
torage
ips
Refer to the instructions below for food storage.
1.
Butter, eggs, condiments
2.
Beverages (cans, bottles)
3.
Coldest zone (under the shelf)
4.
Meat and dairy products (preferably
placed on the shelf under the freezer
compartment)
5.
Making ice cubes
Set your thermostat
Correct temperature
5
4
3
15
1
2
V.2.0

Publicidad

loading