Publicidad
Idiomas disponibles
Idiomas disponibles
•
Open the refrigerator door and remove the items inside.
•
Remove the top hinge cover (2).
•
Remove the two screws (3) that connect the top hinge to the panel, and then remove the
top hinge (4).
•
Lift the door carefully and place it on a padded surface so as not to scratch it.
•
Remove the hole covers (1) and place them on the opposite side of the door opening. Make
sure you push it all the way in.
•
Remove the two screws (6) which secure the top hinge (6).
•
Remove the bottom hinge(5).
•
Remove the front foot (7) before making the change and transfer it to the other side of the
refrigerator.
•
Install the bottom hinge (5) on the lower opposite side of the appliance. Tighten the screws(6).
•
Replace the door by inserting the lower hinge pivot into the hole at the bottom of the door.
Close the door.
•
Install the top hinge (4) on the other side using the screws (3). Make sure that the door pivot
enters the top hinge hole. Only tighten the screws when the door is level.
•
Replace the hinge cover (2).
For reasons of hygiene, the inside of the appliance and the accessories must be cleaned
regularly.
d
efrosting
Unplug the appliance from the power point before defrosting.
To defrost the appliance :
- Choose a time when your appliance is not full.
- Pack your food in a bag and keep it cool (ideally, transfer it to another refrigerator).
- Leave the refrigerator door open.
- To speed up the defrosting process, you can place a container filled with hot water in the
compartment and close the door.
- Once defrosting is complete, empty the drip tray and clean the cavity.
WARNING: Do not use an electric heating device or any other mechanical or artificial device
to speed up the defrosting process.
- Do not use aerosol de-icers as they may be hazardous to health and/or contain substances
that could damage the plastic.
V.2.0
MAINTENANCE AND CLEANING
18
Publicidad
