20
21
20 Display: CAM operation
21 Operating mode key: CAM operation / continu-
ous operation
22 Display: Continuous operation
3.3
Scope of delivery
1 SILENT powerCAM TC
1 Quick Start Guide
3 Waste bags (1 placed in the dust drawer)
1 Suction hose, 2 m, incl� 2 end bushings
3.4
Accessories
2934 0014 Waste bag for TC, TC2, EC, EC2 & PowerCAM TC (25x)
2921 0003 End bushing set, 2x
90002 1532 SILENT TC, TC2 fine filter, class M
90003 4240 Suction hose, 3 m, incl� 2 end bushings
90003 4826 Suction hose, antistatic, 3 m, incl� 2 end bushings
90115 0823 Suction hose, inside diameter 38 mm, 6 m
90215 0823 Suction hose, inside diameter 38 mm, 9 m
90003 4305 Adapter for hose connection
90003 4430 Universal suction hose adapter
90003 4314 Y-junction
2926 0000 Y-junction for dust extractor
2937 0002 External air duct for SILENT TC/EC/PowerCAM
2934 0007 90° angled connector SILENT
2934 0005 Interface cable, type A, for vhf
2934 0006 Interface cable, type B, for Roland DG
2934 0008 Interface cable, type C, for imes-icore
2934 0009 Interface cable, type D, for Amann Girrbach
2934 0010 Interface cable, type E, for Yenadent/Origin + Nema adapter
2934 0011 Interface cable, type F, for Zirkonzahn
2934 0012 Interface cable, type F, for Zirkonzahn + C14 adapter
2934 0013 Interface cable, type G, for vhf (6-pin, from K5)
Additional details and accessories are available at www.renfert.com.
22
23
- 7 -
24
25
23 Selection key
24 Display: Empty dust drawer
25 Enter key, saves input
26 Display: Error notification
en
26
Fig.
2