Publicidad
Idiomas disponibles
Idiomas disponibles
To avoid electric shock or personal injury, read the "Safety Information" and "Rules for Safety
Operation"carefully before using the Meter.
Digital Multimeters COD.58515 (hereafter referred to as "the Meter") is 4 1/2 digits
with ex-large LCD, steady operations, fashionable structure and highly reliable hand-held
measuring instrument. The Meter uses large scale of integrated circuit with double integrated
A/D converter as its core and has full range overload protection. The Meter has 28 different
measuring functions. It has not only can measure AC/DC Voltage, AC/DC Current, Resistance,
Temperature, Capacitance,
Frequency, Transistor, Diode and Continuity, but also have Data Hold, Full Icon Display,
Overload Protection and Sleep Mode features.
This Meter complies with the standards IEC61010: in pollution degree 2, overvoltage
category (CAT. II 1000V, CAT. III 600V) and double insulation.
CAT. II: Local level, appliance, PORTABLE EQUIPMENT etc., with smaller transient voltage
overvoltages than CAT. III.
CAT. III: Distribution level, fixed installation, with smaller transient overvoltages than CAT. IV
Use the Meter only as specified in this operating manual, otherwise the protection provided
by the Meter may be impaired.
In this manual, a Warning identifies conditions and actions that pose hazards to the user, or
may damage the Meter or the equipment under test.
A Note identifies the information that user should pay attention to.
Warning!
To avoid possible electric shock or personal injury, and to avoid possible damage to
the Meter or to the equipment under test, adhere to the following rules:
•
Before using the Meter inspect the case. Do not use the Meter if it is damaged or the
case (or part of the case) is removed. Look for cracks or missing plastic. Pay attention to the
insulation around the connectors.
OVERVIEW
SAFETY INFORMATION
RULES FOR SAFE OPERATION
ENGLISH
21
Publicidad
