EGAmaster EGATRONIK 58515 Manual De Instrucciones página 38

B. REPLACING THE FUSES (see figure 10)
Warning
To avoid electrical shock or arc blast, or personal injury or damage to the Meter,
use specified fuses ONLY in accordance with the following procedure.
To replace the Meter's fuse:
1. Turn the Meter off and remove all connections from the terminals.
2. Remove the holster from the Meter.
3. Remove the 3 screws from the case bottom, and separate the case top from the case bottom.
4. Remove the fuse by gently prying one end loose, then take out the fuse from its bracket.
5. Install ONLY replacement fuses with the identical type and specification and make sure the
fuse is fixed firmly in the bracket.
Fuse 1: 0.5A, 250V, fast type,
Fuse 2: 0.63A, 250V, fast type,
6. Rejoin the case bottom and case top, and reinstall the 3 screws and holster.
Replacement of the fuses is seldom required. Burning of a fuse always results from improper
operation.
38
(figure 10)
ɸ
5x20mm
ɸ
5x20mm