Publicidad
Idiomas disponibles
Idiomas disponibles
I. Capacitance
Range
2nF
20nF
µF
2
µF
20
Remarks:
•
Testing signal is approx.: 40Hz
J. Transistor test
Range
hFE
Remarks:
•
The display value is the tested transistor (NPN, PNP nearest value of hFE
~1000 ).
(0
This section provides basic maintenance information including battery and fuse replacement
instruction.
Warning
Do not attempt to repair or service your Meter unless you are qualified to do so
and have the relevant calibration, performance test, and service information.
To avoid electrical shock or damage to the Meter, do not get water inside the
case.
A. GENERAL SERVICE
l Periodically wipe the case with damp cloth and mild detergent. Do not use chemical
solvent.
l To clean the terminals with cotton bar with detergent, as dirt or moisture in the
terminals can affect readings.
l Turn the Meter off when it is not in use and take out the battery when not using for a
long time.
l Do not store the Meter in place of humidity, high temperature, explosive, inflammable
and strong magnetic field.
Resolution
0.0001nF
0.001nF
µF
0.0001
µF
0.001
40mVrms.
Resolution
Testing Conditions
1
MAINTENANCE
Accuracy
Overload Protection
±(3%+40)
±(4%+10)
Overload Protection
µA
lbo 10
Vce 2.8V
250V rms
250V rms
37
Publicidad
