Publicidad
Idiomas disponibles
Idiomas disponibles
To remove battery pack (Fig. 13)
WARNING:
location of your feet and children or pets
around you when pressing the battery-
release button. Serious injury could result
if the battery pack falls. NEVER remove
the battery pack at a high location.
1. Hold the battery pack in the palm of
your hand.
2. Press the battery-release button with your thumb; the battery pack will disengage
from the latch.
3. Grasp the battery pack and remove it from the power head.
WARNING:
and keep hands clear of the lock-off button and trigger switch when carrying or
transporting the machine.
STARTING/STOPPING THE MACHINE
WARNING:
not attempt to start the power head before connecting the pole saw attachment.
Before Starting the Pole Saw:
1. Remove the battery pack.
2. Make sure that the chain is properly mounted and the quick chain-tension adjust
knob is fully tightened, which ensures that the chain is correctly tensioned.
3. Check the side cover to ensure that it is against the guide bar and saw chain
without any looseness and damage.
4. Check the oil level and fill the tank as needed. Make sure the chain is well
lubricated.
5. Check the sharpness of the cutting teeth of the saw chain.
24
56-VOLT LITHIUM-ION POLE SAW — PS1000/PS1000-FC
Always be aware of the
To avoid serious personal injury, always remove the battery pack
NEVER OPARATE THE POWER HEAD WITHOUT AN ATTACHMENT. Do
13
Press to Release
Publicidad
