Simu T5 ZSP Manual Del Usuario página 12

OPERATION AND MAINTENANCE
14
This motor is maintenance-free.
1- Using this motor with a product without locking system:
- Press the ▲ button on the control to raise the product.
- Press the ▼ button on the control to lower the product.
- If the product is moving, briefly press the « STOP » button to stop the product.
- If the product is stopped, briefly press the « STOP » button to run the motor to the intermediate position (to
modify or delete an intermediate position, see the section §10).
2- Using this motor with a product with automatic locking system:
- Press the ▲ button on the control to raise the product. The product starts by moving downward to release
tension on the fabric, then rises to the upper end limit.
- Press the ▼ button on the control to lower the product. When it reaches the lower end limit, the product rises
automatically to draw the fabric taut.
- If the product is moving, briefly press the « STOP » button to stop the product.
- If the product is stopped, briefly press the « STOP » button to run the motor to the intermediate position (to
modify an intermediate position, see the section §10).
3- Using this motor with a product with manual locks:
- To raise the product: Press the ▼ button on the control to lower the product. Unlock the locks manually. Press
the ▲ button: the product run to the upper end limit.
- To lower the product: Press the ▼ button, the product runs to the lower end limit. Lock the latches manually.
Press the « STOP » button: the product lowers then rises to draw the fabric taut.
- If the product is moving, briefly press the « STOP » button to stop the product.
- If the product is stopped, briefly press the « STOP » button to run the motor to the intermediate position (at Down
end limit the locks must be unlocked).
Tips and recommendations for use:
PROBLEMS
The product does not operate.
If the product still does not work, contact a motor and home automation professional.
US
12/12
POSSIBLE CAUSES
The overheating protection on the
motor has been activated.
SOLUTIONS
Wait for the motor to cool down.