EINHELL TC-RO 850 Manual De Instrucciones Original página 16

ble for the working speed of the router.
Do not lose these safety instructions.
2. Layout and items supplied
2.1 Layout
1. Base plate
2. Clamping nut
3. Spindle lock
4. Locking screw
5. Trimmer guide base
6. On/off switch
7. Locking screw for depth adjustment
8. Depth adjustment screw
9. Trimmer guide
10. Guide sleeve
11. 2 x open-end wrench
12. Parallel fence guide
13. Locking screw for parallel guide
14. Adjusting screw for trimmer guide
15. Locking screw for trimmer guide
16. Protective cover
17. Spindle
2.2 Items supplied
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Important!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suffocating!
•
Electric router
•
Guide sleeve
•
Parallel stop
•
Open-ended wrench
•
Clamp 1/4" (6,35 mm)
•
Safety guard
•
Original operating instructions
Anl_SA_Anl_TC_RO_850_SPK8.indb 16 Anl_SA_Anl_TC_RO_850_SPK8.indb 16
GB
3. Proper use
The router is ideal for machining wood and plastic
and also for cutting out knots, cutting grooves, re-
moving recesses, copying curves and logos, etc.
The router must not be used for machining metal,
stone, etc.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
See warranty card of your country.
Wear ear-muffs.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 62841.
Handles
Vibration emission value a
K uncertainty = 1.5 m/s
Warning!
The specified vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specified value
in exceptional circumstances.
The specified vibration value can be used to
compare the equipment with other electric power
tools.
The specified vibration value can be used for initi-
al assessment of a harmful effect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
- 16 -
= 15.877 m/s
2
h
2
09.08.2021 09:28:02 09.08.2021 09:28:02