Publicidad
Idiomas disponibles
Idiomas disponibles
Audio
Change the system volume setting. Click
Settings
volume.
SD Card Status
SD-Card
SD-Card Performance
Storage
Check
SD Card Format
Date&Time
Set the system date and time to preferred displaying format.
Software Version
System
Firmware Upgrade
Reset
SYSTEM OPERATION
When in single channel mode: Tap once on the monitor screen to show the control
menu. It will stay 5 seconds, then return to the previous single camera view.
NOTE: The control menu will be different depending on the default view settings.
Default View setting is Single View
Icon
/
Click to view the SD Card memory information, such as the
total size, remain size and usage size.
Click to check the performance of the SD Card.
Format the SD Card, all the files will be erased.
Show the software version of the monitor and the current
paired camera(s).
Choose to upgrade the software when a new version is
available.
Restore to factory default settings. All the data will be erased.
Description
Tap once to start recording, tap the second time to cancel the recording.
NOTE: The record function is available only if there is a Micro-SD card already
inserted. Do not remove the SD-Card while recording, or the data might got
damaged. Stop recording before removing the SD-Card.
Tap to disable/enable the camera view with turn signal.
Tap to switch the default view to single screen view.
Tap to switch the default view to split view.
Tap to decrease the volume of the monitor.
Tap to increase the volume of the monitor.
Tap to mute the monitor.
to increase the volume or
Default View setting is Split Screen View
- 22 -
to decrease the
CCD-0005512 Rev: 03-20-22
Publicidad
