Furrion VISION S+ FOS7HTAEM Manual De Usuario página 24

Tap twice on the monitor screen to bring up the camera selection interface.
Icon Description
Tap to turn on/off the on-screen guideline.
In multi channel mode with DOOR, LEFT and RIGHT selected, tap
with on-screen guideline.
In single channel mode with REAR selected, tap once to enter the parking lines of rear view;
tap twice to enter Parking mode with on-screen guideline.
The selected mode will remain for 30 seconds before returning to the previous mode.
Tap to select the door camera view.
Tap to select the left camera view.
Tap to select the right camera view.
Tap to select the rear camera view.
Tap to switch to quadrant view mode. If the default view setting is single view, the screen will
stay in split screen view for 10 seconds then return to single view mode.
IMPORTANT: Quad view mode is not recommended for observation while you are
driving. When in quadrant mode:
1. Tap the center of the monitor screen to show the
2. Tap to switch among Quad Split, H Split and Triple Split.
MODE
CCD-0005512 Rev: 03-20-22
icon.
MODE
- 23 -
to enter Parking mode