Dometic ACC3100D Instrucciones De Uso página 8

EN
8.3 Selecting the mode
The AUTO mode is selected at turn on.
1.
Press the button.
• The indicator lights up.
• The TURBO mode is activated.
2. Press the
button.
• The indicator lights up.
• The SLEEP mode is activated.
3. Press the
button.
• The indicator lights up.
• The AUTO mode is activated.
4. Press the
button.
The mode selection is repeated from the beginning (see step 1).
Selecting the STORAGE mode
WARNING! Health hazard
Connect the vehicle or the ventilation system to the mains to prevent the ventilation system from discharg-
ing the battery.
Press the button for 3 s to activate the STORAGE mode.
The indicator lights up.
8.4 Adjusting the light (optional)
The LED light strips can be dimmed in 6 different levels.
Press the button to adjust the brightness.
Each press of the
lection is repeated from the beginning.
8.5 Resetting the display
If the display is blocked, it must be reset.
8
button increases the brightness. After level 6, the LED light strips turn off and the level se-