Publicidad
Idiomas disponibles
Idiomas disponibles
EN
18
OPERATION
1.
When you insert the plug of the appliance into the socket, a beep sounds. The
screen lights up and the temperature and time are displayed on the screen
(for example: temperature display: 80 °C; time display: 30 MIN). If no button is
pressed within 10 minutes, the screen will go dark again.
2.
Press the temperature icon on the screen to adjust the temperature. The
temperature symbol starts flashing. The temperature can now be adjusted by
turning the dial. Turning the control dial clockwise increases the temperature
by 1 °C at a time. If you turn the control dial anticlockwise, the temperature is
lowered by 1 °C at a time (the lowest temperature that can be set is 30 °C; the
highest temperature that can be set is 100 °C). Each time you turn it, a sound
is heard and the screen lights up. If no buttons are pressed and the control
dial is not turned, the temperature display flashes three times to confirm the
set temperature. Optionally, it is also possible to set a start time for the unit.
3.
Press the temperature icon on the screen to display the current set water
temperature.
4.
Turning the control dial clockwise increases the set time by one minute.
Turning the control dial anticlockwise decreases the set time by one minute
(minimum time setting: 1 minute; maximum time setting: 180 minutes). With
each turn, the device will beep and the screen will light up. If no buttons are
pressed and the dial is not turned, the time display will flash three times to
confirm the time set. The unit starts operation automatically.
°C
MIN
Publicidad
