Publicidad
Idiomas disponibles
Idiomas disponibles
4
Press MODE r epeatedly to select "PRO LOGIC."
5
Press TEST TONE on the supplied r emote.
You will hear a test tone (see this page) from each
speaker sequentially.
6
Adjust the volume level so that the volume of the
test tone fr om each speaker sounds the same fr om
where you ar e listening.
• To adjust the balance of the front right and front left
speakers, use the BALANCE control on the front of
the main unit.
• To adjust the volume level of the center speaker,
press the LEVEL CENTER +/– buttons on the
remote.
• To adjust the volume level of the rear speakers, press
the LEVEL REAR +/– buttons on the remote.
7
Press TEST TONE on the r emote again to tur n of f
the test tone.
z
You can adjust the volume level of all speakers at the same
time
Rotate MASTER VOLUME on the main unit or press MASTER
VOLUME +/– on the remote.
z
What is a test tone?
A test tone is a signal that is produced by the receiver and used to
adjust speaker volume. The test tone is output from speakers in
the following two ways:
• When NORMAL, WIDE, or 3CH LOGIC mode is selected
The test tone is output from the front L (left), center, front R
(right), and rear speakers (except for 3CH LOGIC mode) in
succession.
• When PHANTOM mode is selected
The test tone is output from the front and the rear speakers
alternately.
See the table on page 24 for information on the output of the test
tone for sound fields other than PRO LOGIC.
Downloaded from:
https://www.usersmanualguide.com/
Front (L)
Front (R)
Center
Test tone
3CH LOGIC
Rear (L, R)
NORMAL/WIDE
Front (L, R)
Test tone
Rear (L, R)
PHANTOM
Before You Use Your Receiver
Before turning on the receiver
Make sure that you have:
• Turned MASTER VOLUME to the leftmost position (0).
• Selected the appropriate front speakers (see "8
SPEAKERS selector" on page 17).
• Set BALANCE to the center position.
Clearing the receiver's memory
Before you use your receiver for the first time or when
you want to clear the receiver's memory, do the procedure
below.
1/u
VIDEO
CURSOR MODE
SURROUND
BASS/
SET UP
TREBLE
INDEX
SPEAKERS
A
OFF
B
A
+
B
FUNCTION
DIRECT
DISPLAY
TUNING
1
2
3
4
5
VIDEO
PRESET
TUNING
–
+
–
TUNING
+
SHIFT
6
7
8
9
0
CD
PHONES
SLEEP
FM MODE
FM/AM
MEMORY
1
Turn of f the receiver.
2
While pressing down VIDEO and T APE/MD, pr ess
1/u to tur n on the r eceiver.
"ALL CLEAR" appears in the display and the items
including the following are reset or cleared:
• All preset stations are reset to their factory settings.
• All sound field parameters are reset to their factory
settings.
• All index names (of preset stations and program
sources) are cleared.
• All adjustments made with the SET UP button are
reset to their factory settings.
• The sound field memorized for each program source
and preset station is cleared.
TAPE/MD
MASTER VOLUME
5.1/DVD
INPUT
TONE
BASS
BOOST
SOUND FIELD
BALANCE
ON/OFF
MUTING
SOUND FIELD
TV/LD
TAPE/MD
GENRE
MODE
5.1/DVD
BASS
L
R
TUNER
PHONO
INPUT
BOOST
TONE
ON/OFF
EN
13
Publicidad
