Publicidad
Idiomas disponibles
Idiomas disponibles
Indexing Preset Stations
and Program Sources
You can enter a name of up to 8 characters for preset
stations (station index) and program sources. These index
names (for example, "VHS") appear in the receiver's
display when a station or program source is selected.
Note that no more than one name can be entered for each
preset station or program source.
This function is useful for distinguishing components of
the same kind. For example, two VCRs can be specified
as "VHS" and "8MM," respectively. It is also handy for
identifying components connected to jacks meant for
another type of component, for example, a second CD
player connected to the TAPE/MD jacks.
1
To index a preset station
Press TUNER.
The last station you received is tuned in.
To index a program source
Select the program source (component) to be
named, then go to Step 3.
2
Tune in the preset station you want to create an
index name for.
If you are not familiar with how to tune in preset
stations, see "Tuning to preset stations" on page 28.
3
Press CURSOR MODE repeatedly until the INDEX
indicator lights up.
4
Create an index name by using the cursor buttons
as follows:
Press
or
move the cursor to the next position.
The index name is stored automatically.
To insert a space
Press
or
display (the space character is between "]" and "A").
If you've made a mistake
Press
or
changed flashes, then select the right character.
To assign index names to other stations
Repeat Steps 2 to 4.
EN
30
Downloaded from:
https://www.usersmanualguide.com/
to select a character, then press
until a blank space appears in the
repeatedly until the character to be
Recording
Your receiver makes it easy to record to and from the
components connected to it. You don't have to connect
the playback and recording components directly to each
other: once you select a program source on the receiver,
you can record and edit as you normally would using the
controls on each component.
Before you begin, make sure you've connected all
components properly.
CURSOR MODE
SURROUND
BASS/
SET UP
TREBLE
INDEX
SPEAKERS
A
OFF
B
A
+
B
DIRECT
DISPLAY
TUNING
PRESET
TUNING
–
+
–
TUNING
+
SHIFT
PHONES
SLEEP
FM MODE
FM/AM
MEMORY
Playback component
(program source)
ç: Audio signal flow
c: Video signal flow
Recording on an audio tape or MiniDisc
You can record on a cassette tape or MiniDisc using the
receiver. See the instruction manual of your cassette deck
or MD deck if you need help.
1
Select the component to be recorded.
to
2
Prepare the component for playing.
For example, insert a CD into the CD player.
3
Insert a blank tape or MD into the recording deck
and adjust the recording level, if necessary.
4
Start recording on the recording deck, then start
playback on the playback component.
Notes
• You cannot record an analog audio signal from a component
connected to the 5.1/DVD INPUT jacks.
• Sound adjustments do not affect the signal output from the
audio output jacks.
5.1/DVD
INPUT
TONE
BASS
BOOST
SOUND FIELD
ON/OFF
FUNCTION
SOUND FIELD
1
2
3
4
5
VIDEO
TV/LD
TAPE/MD
GENRE
MODE
5.1/DVD
BASS
6
7
8
9
0
CD
TUNER
PHONO
INPUT
BOOST
TONE
ON/OFF
FUNCTION buttons
Recording component
(tape deck, MD deck,
VCR)
MASTER VOLUME
BALANCE
MUTING
L
R
Publicidad
