Adjustments Using the SET
UP Button
The SET UP button allows you to make following
adjustments.
Adjusting the brightness of the display
1
Press SET UP repeatedly until "DSPL SET UP"
appears in the display.
2
Press the cursor buttons (
brightness level.
You can select any of four brightness levels.
Increasing the output level of the rear
speakers by 5 dB
1
Press SET UP repeatedly until "REAR GAIN" appears
in the display.
2
Press the cursor buttons (
UP."
To restore the normal output level
Repeat the procedure above, selecting "GAIN NORM" in
Step 2.
EN
32
Downloaded from:
https://www.usersmanualguide.com/
/
) to select the
/
) to select "GAIN