Kemper MaxiFil Instrucciones De Servicio página 54

2 Safety
2.1 General information
The product is designed and built according to state-of-the-art technology
and the recognised safety rules and regulations. When operating the
product, technical hazards for the operator or impairment of the product
as well as other property may occur, if:
• it is not operated by trained or instructed personnel
• it is not used for the purpose intended and/or
• it is improperly maintained
2.2 Information on signs and symbols
DANGER
This symbol in conjunction with the signal word "Danger" indicates
imminent danger. Non-adherence of the safety note leads to death or
serious injuries.
WARNING
The symbol in conjunction with the signal word "Warning" indicates a
potentially dangerous situation. Non-adherence to the safety notice may
lead to death or serious injuries.
CAUTION
The symbol in conjunction with the signal word "Caution" indicates a
potentially dangerous situation. Non-adherence of the safety note may
lead to slight or negligible injuries.
May also be used for warnings against property damage.
NOTE
The general information is simple additional information which does not
warn about personal injury or property damage.
1. Enumerations of action steps are marked as numbers with a dot, where
the order is important.
• Bullet points indicate lists of parts in a legend or instructions for which
the sequence is unimportant
1502954-00 - 54 -
EN