Kemper MaxiFil Instrucciones De Servicio página 85

5. Seal the saturated filter element (Pos. 1) with the sealing cap (Pos. 3) of
the new filter element.
6. Then dispose of the saturated filter element in accordance with current
regulations.
7. Push the new filter element back into the product mounting (Pos. 4) in
reverse order. Ensure the sealing ring (Pos. 2) does not rub against the
sealing surface (Pos. 5) and is not deformed or destroyed.
1502954-00
Fig. 31: Carrying out a filter change
Fig. 32: Carrying out a filter change
- 85 -
EN