Kemper MaxiFil Instrucciones De Servicio página 77

Pos. Description
1 Device button with power
light
2 Signal light
3 Rotary regulator for run-on
time in start/stop operation
4 Maintenance socket
5 Connection for pressure
measurement
6 Signal horn
7 Connector socket for start-
stop sensor
8 Pressure switch
6.3 Positioning the extraction hood
The extraction arm or extraction hood is designed in such a way that it can
be adjusted and moved easily by hand. Once it has been positioned, the
extraction hood maintains its set position of its own accord. Furthermore,
both the extraction hood and the arm can be pivoted through 360° so that
almost any position can be set. It is important that the extraction hood is
always positioned properly in order to achieve adequate capture of the
welding fumes. The correct position is shown on the following image.
1502954-00
Function
Switches the product on or off
Signals the operation of the product
For setting the desired run-on time
of the fan
For service personnel only
For service personnel only
For service personnel only
Tab. 30: Operating control
- 77 -
EN