Kemper MaxiFil Instrucciones De Servicio página 67

NOTE
Ensure that the welding current return line between the workpiece and
the welding machine has a low resistance and that connections between
the workpiece and the product are avoided so that the welding current
cannot flow back to the welding machine via the product's protective
conductor.
5.1 Unpacking the product
Pos. Description
1 Outer packaging
2 Silencer
3 Cable duct (2x)
4 Lid plate
Unpacking is carried out as follows:
1502954-00
Fig. 19: Unpacking the product
Pos.
5
6
7
8
Tab. 21: Positions on the product
- 67 -
Description
Adapter
Control box
Edge protection profile
Pallet
EN