Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly example,
Information on indexing gear
Switch off the motor.
Wait for standstill.
Adjust required speed. (see fig. 4).
ATTENTION! Never change the speed drive during operation.
When changing the speed, it is recommended to turn slightly by hand the output shaft (drill
bit holder), in order to enable the gear teeth to thread.
Read operation instructions/safety instructions!
Before working on or with the tool, read the safety instructions and follow the instructions
during operation.
Do not modify the machine or the machine tools and accessories after receipt. Any
constructive changes or modifications need the manufacturer`s acceptance and have to be in
compliance with the safety instructions. Use the machine only for its determination. Consider
the technical data of the equipment and the ambient temperatures. Pay attention to labels,
restrictions of use and special instruction notes on the machine tools and the machine itself.
Check regularly that the type plate and symbols on the machine are legible. If necessary,
contact the manufacturer to replace them. Only operators with technical knowledge, trained by
authorized responsible technical personnel, may install, adjust, operate, transport and store the
machine.
36
Fig.3
BASIC SAFETY INSTRUCTIONS
Fig.4
Publicidad
