3. OPERATION
1. Plug in the appliance to the mains supply. Make sure the switch is off before plugging in the appliance.
2. Wash the fruit or vegetables you can to juice and cut them into pieces that fit into the feeding
tube. Remove any pit, hard seed, thick skin or hard shell from the foodstuffs before putting
them into the feeding tube.
3. Turn on the switch. You can select between two different positions according to the type of fruit
or vegetable you want to juice. It is recommended not to exceed 1 minute of continuous operation.
4. Insert the fruit or vegetables into the feeding tube.
5. Push the fruit and vegetable pieces carefully until they reach the sieve. Do not press too hard,
as it could damage the product.
6. When you finish juicing the fruits and vegetables, and juice stops flowing from the nozzle,
turn off the power and unplug the appliance. When the motor and sieve stop rotating, turn the
nozzle counterclockwise until the
• Clip the clasps to the outer rim of the upper
cover and push them down, in order to lock
the cover to the main body of the appliance.
• Put the jar divider into the jar. Make sure the
grooves on the sides of the jar divider match
the guide on the interior surface of the jar.
Then, close the jar with its cover.
• Insert the juice nozzle into the opening of
the jar. Make sure the juice nozzle is in
.position.
• Align the groove in the press with the guide
on the interior surface of the feeding tube
and insert the press into the feeding tube.
symbol is aligned with the
ENGLISH
symbol on the central ring
StrongTitanium 19000
15