Descargar Imprimir esta página

SOMFY Sonesse 40 WF RTS Li-ion Instrucciones página 4

Ocultar thumbs Ver también para Sonesse 40 WF RTS Li-ion:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 63
EN
2. INSTALLATION
Warning
• These instructions are mandatory for the home motorisation and automation professional installing the drive.
• Comply with current standards and legislation in the country of installation.
Caution
• Never drop, knock or puncture the drive or immerse it in liquid.
• Install an individual control point for each drive.
͉
Make sure that LED, programming button and input connection remain visible and easily accessible after
installation.
2.1. ASSEMBLY
2.1.1. Drive preparation
Caution
Check that the inner diameter of the motorized product's tube is Ø 37 mm or greater.
1) Fit the crown (a) and drive wheel (b) to the drive.
2) Measure the length (L) between the end of the drive wheel and the
head end.
2.1.2. Tube preparation
1) Cut the tube to the required length.
2) Deburr the tube and remove the debris.
2.1.3. Drive/tube assembly
1) Slide the drive into the tube. Insert the wheel by aligning the wheel
to the tube profile. Insert the drive half way and then slide the crown
down the drive and insert it in the tube. Finally, push the drive inside
the tube.
2) Not required, but if needed, fix the tube to the drive with self-
tapping screws or steel pop rivets depending on the dimension
(L - ± 5/15 mm).
2.1.4. Mounting the tube-drive assembly on the brackets
Drive plate for specific bracket.
Caution
The drive plate must be mounted using the screws provided in the
Somfy kit.
͉
For optimal radio reception, the drive antenna should be kept straight
and should be positioned outside of headrail (if used).
2.2. WIRING
Warning
• To ensure electrical safety, this Class III drive must be powered by a «SELV» voltage source (Safety Extra Low
Voltage).
• Improper using battery pack may cause overheat, fire, explosion, resulting in serious injury or death.
• This drive contains batteries that are only replaceable by skilled persons.
• Do not expose the drive or battery to excessive temperatures.
• There is a risk if terminals of the battery-operated drive or battery being short circuited by metal objects.
• The battery level must be below 30% before shipping by air.
2
Copyright
©
2019 - 2022 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
Sonesse 40 WireFree RTS Li-ion
1
1
2 2
1 1
1
1
2 2
a a b b
2 2

Publicidad

loading