Cleaning The Outside Of The Machine - ITV ICE MAKERS SPIKA NG 75 Manual Del Usuario

For modular models remove the back panel (see figure).
Back panel
3) Clean condenser using a vacuum cleaner, soft brush or low pressure air. Clean from top to bottom, not side to side.
Be careful not to bend the condenser fins.
(2) Water Condenser
The water condenser may require cleaning due to scale build-up. The cleaning procedures require special pumps and
cleaning solutions. They must be performed by qualified maintenance or service personnel.

CLEANING THE OUTSIDE OF THE MACHINE

Clean the area around the ice machine as often as necessary to maintain cleanliness. Sponge any dust and dirt off the
outside of the ice machine with mild soap and water. Wipe dry with a clean soft cloth. A commercial grade stainless steel
cleaner/polish can be used as necessary.
CHECKING FOR WATER LEAKS
This must be done whenever maintenance is carried out on the machine: check all water connexions, braces, tubes and
hoses in order to eliminate leaks and prevent breakages and flooding.
15
USER MANUAL SPIKA