Sony MDR-RF5000K Manual De Instrucciones página 14

1 Connection
Connecting the Headphone System
Connecting the transmitter to analog
components
Connecting cable (supplied)
Use the supplied connecting cable (stereo mini-plug y pin plug × 2) when
connecting a stereo mini-jack (line out jack or headphone jack) to the LINE IN jacks.
Transmitter
To LINE IN jacks
In this case, set the volume on the player at a medium level. Noise can occur if the volume on the
player is set too low.
When connecting to a TV headphone jack, sound may not be heard from the TV speaker.
Connecting cables (sold separately)
Use the connecting cable (pin plug × 2 y pin plug × 2) to connect the audio output jacks on a
VCR, TV, etc., to the LINE IN (L/R) jacks on the transmitter.
Audio right (R, red)
14
US
Connection
Downloaded from:
Stereo mini-plug
Audio left
(L, white)
Audio right
(R, red)
Connecting cable (supplied)
Transmitter
To LINE IN jacks
Audio left
(L, white)
Audio cord (sold separately)
https://www.usersmanualguide.com/
TV, portable device, etc.
to headphones jack
(stereo mini jack)
Unimatch plug
adaptor (supplied)
To audio output jacks
Audio left
(white)
Audio right (red)
to headphones
jack (stereo
phone jack)
VCR, TV, or other
component