Sony SDM-V72W Manual De Instrucciones página 11

Connect ing your display t o your comput er
Set up 2
Turn off the display and computer before connecting. Do not touch the pins of the video signal cable connector as this might bend the pins.
1
Connect ing t o an IBM PC/AT
Downloaded from: https://www.usersmanualguide.com/
2
Connect ing a M acint osh
- 10 -
1
Remove t he back panel by holding t op
w it h one hand as in t he illust rat ion t hen
snap out t he but t ons locat ed at each
corner.
2
Remove t he cable cover by light ly pulling
t op concave port ion.
Connect ing t o an IBM PC/AT or compat ible
comput er
Using the HD15/D-sub cable (supplied),
connect the computer to the display's HD15
input connector.
Be sure to check the alignment of the HD15/
D-sub cable. Do not force the connector in
the w rong w ay or the pins might bend.
Connect ing a M acint osh
When connecting a M acintosh computer,
use an adapter (not supplied) if necessary.
Connect the adapter to the computer before
connecting the video signal cable.