Machine Maintenance; Daily Maintenance - Tennant EX-CAN-10 Manual Del Operario

MACHINE MAINTENANCE

To keep machine in good working condition, simply
follow machines daily and monthly maintenance
procedures.
FOR SAFETY: When servicing machine, unplug
cord from wall outlet.

DAILY MAINTENANCE

(Every 4 Hours of Operation)
1. Drain and rinse out recovery tank thoroughly
(Figure 11).
FIG. 11
2. Remove and clean the float shut- off screen,
located in the recovery tank (Figure 12).
FIG. 12
EX- CAN- 10 (04- 10)
3. Vacuum out the leftover solution from the solution
tank (Figure 13).
FIG. 13
4. Inspect the accessory tool spray pattern for
plugging. If plugged, remove the spray tips and
screens and soak them in acetic acid solution for
up to six hours. Do not use pointed objects to
unplug tips, damage will occur (Figure 14).
FIG. 14
5. Remove any clogged debris in the accessory tool
(Figure 15).
FIG. 15
OPERATION
EN
9