Astralpool Guardian Pool NN Manual De Instalación página 18

•
OUTPUT mA
The usable output mA number is different for the measurements:
- Output mA 1 pH;
- Output mA 2 Free Chlorine;
- Output mA 3 Rx;
- Output mA 4 Temperature;
Figure 53 Output set menu
It is the window reserved to the output mA:
LOW limit: Set the minimum value of the output.
HIGH limit: Set the maximum value of the output.
Alarm value (mA): Set the value that if it is crossed generates an alarm.
PID: Press to open the window of the PID
Figure 14 PID set menu
PID: Enabled PID on the output (ON/OFF).
PID Set point: Sets the set point of the PID.
PID algorithm: Sets which kind of PID (P/I/D).
PID algorithm sign: Sets the control type (Direct/Inverse).
0000138319 Rev. 3.2
Astralpool multiparameter
USER MANUAL
16