A.MENARINI GlucoMen Day METER 2K Manual De Instrucciones página 13

English
• Whenever you open a new vial (or foil packet) or a new box of test strips.
• If the meter or test strips do not function properly.
• If your symptoms are inconsistent with the test results and you feel
that the meter or test strips are not working properly.
• If you drop or damage the meter.
Control Solution Testing
Step 1 Inserting Test Strip
Insert a test strip into the meter's test strip
port, with the contact bars facing upwards.
Gently push the test strip into the port until the
meter beeps. Be careful not to bend the strip
while pushing it in.
The symbol will show up. In case a β-Ketone
test strip is inserted, the word "KETONE" will
be also displayed.
Step 2 Activating Control Solution Test Mode
Press and hold the ► button for 3 seconds to
activate the Control Solution Test Mode. This will
the ► button for another 3 seconds.
Step 3 Applying Control Solution to Test Strip
Shake the bottle before each test. Remove the
drop. Then wipe the tip with a clean tissue or
cloth. Dispense a drop of control solution onto a
clean non-absorbent surface. It helps to squeeze
a drop onto the top of the cap as shown.
After the
13
symbol appears on the display,