Publicidad
Idiomas disponibles
Idiomas disponibles
English
Step 4
After the
to the narrow end of the test strip until the meter beeps. If the
message may appear. It is recommended to place the test strip
vertically into the blood sample site as shown below.
CAUTION
•
Do not allow any foreign substances, such as dirt, blood, or
water, to enter into the meter. The meter may be damaged or may
malfunction. Follow the warning information provided below to
prevent possible damage to the meter.
•
Do not apply the blood sample directly to the test strip port.
•
Do not apply the blood sample to the test strip while holding the
meter in a way that the tip of the test strip faces upwards. The blood
test strip port.
•
Do not store your meter in unsanitary or contaminated sites.
NOTE
minutes of the
remove the strip and reinsert it, and start from Step 2.
17
symbol appears on the screen, apply the blood sample
Good Sample
Sample
Publicidad
