Publicidad
Idiomas disponibles
Idiomas disponibles
FAN BLADES AND GRILLE ASSEMBLY
Rear Grille
1.
Remove the clamping nut from the front motor cover by
turning counterclockwise.
2.
Install the rear grille by positioning it onto the three pins on
the front motor cover.
Lock and secure the rear grille to the front motor cover by
3.
returning the clamping nut and turning clockwise.
Primary Fan Blade And Secondary Fan Blade
1.
Insert the primary fan blade onto the motor shaft and
adjust so that the motor shaft pins fit into the groove on
the rear of the primary fan blade.
Insert the secondary fan blade onto the motor shaft and
2.
firmly lock it into position by turning counterclockwise.
Front Grille
1.
Loosen the safety screw with a screwdriver and unclip the
locking clip.
Align the front and rear grilles.
2.
3.
Press the guard ring firmly over the rear grille so that it
locks onto the rear grille.
4.
Clip the locking clip and tighten the safety screw with a
screwdriver.
3
2
2
1
2 & 3
1 & 4
English | 09
English | 04
Publicidad
