Descargar Imprimir esta página

Flama 670FL Manual De Instrucciones página 20

Publicidad

Idiomas disponibles

Idiomas disponibles

NOTE: Temperature can increase or
decrease in 5°C increments, and time can
increase or decrease in 1 min (short touch)
or 3 min (long touch).
Press the ON/OFF dial to start operation.
The display will show the set time (for 7
seconds) and temperature (for 3 seconds)
alternately.
The viewing window allows you to check
the frying/cooking progress. The window
may steam up, which is normal, and the
steam will disappear. Alternatively, you
can check the process by pulling the frying
basket drawer by the handle.
Tips - Pull the frying basket drawer to shake
foods, if necessary; time countdown will
pause. Slide the frying basket drawer by
the handle back inside the frier and time
countdown will resume.
Pulling the frying basket drawer while
frying/cooking will pause the function.
Press the ON/OFF button to interrupt
operation.
When the program ends, the appliance will
beep and go into standby mode.
STORING
Let the appliance cool down completely
before storing it. Make sure that all parts
are clean and dry. Store the fryer in a dry
place.
Do not place heavy items on top of the fryer
as this can damage it.
18
ANOMALIES AND REPAIR
In case of malfunction, please take the
appliance to an authorized Technical
Assistance Service. Do not attempt to
disassemble or repair the appliance, as this
may be dangerous.
PROTECTING THE ENVIRONMENT
use, recycling and other forms of recovery
in order to reduce its negative effects on
the environment.
When it is no longer in use, this appliance
must not be disposed of together with
other unsorted municipal waste.
The user is responsible for delivering it
free of charge to the selective collection
facilities available for that purpose.
Pieces of equipment that are no longer in
use can also be taken back at points of sale,
by purchasing new pieces of equipment
that are equivalent and have the same
functions.
For more detailed information on collection
points, please contact your City Council or a
point of sale for this equipment.
www.flama.pt
This symbol indicates the
separate collection of electrical
and electronic equipment.
The main objective of the
separate collection of this
waste is to reduce the quantity
to be disposed of, promote re-

Publicidad

loading