Publicidad
Idiomas disponibles
Idiomas disponibles
10 Teeth per inch
14 Teeth per inch
18 Teeth per inch
24 Teeth per inch
Generally, soft materials require coarse pitch
blades and hard materials require fine pitch
blades. Use coarse pitch blades for thick work
and fine pitch blades for thin work.
INSTALLING/REMOVING BLADE
WARNING
damage the saw. Use only band saw blades
that are suitable for this saw.
WARNING
when changing saw blades.
To Install Blade (Fig. 3a, 3b, 3c, 3d)
1. Remove the battery pack from the tool.
2. Turn the tension lock lever located on the
front of the saw 180° COUNTERCLOCKWISE
(A). This releases the tension on the blade
(Fig. 3a).
An unsuitable or incorrectly
fitted band saw blade can
The saw blade may be very
sharp. Always wear gloves
For tough stock 3/16" up to 3-1/4" in diameter or width.
For tough stock 5/32" up to 3/4" in diameter or width.
For thin-wall tubing and thin sheets heavier than 21 gauge.
For thin-wall tubing and thin sheets heavier than 21 gauge.
Fig. 3a
A
Tension Lock Lever
-11-
Publicidad
