Sauder Viabella 420122 Instrucciones De Montaje página 11

Step 7
Fasten the FRONT BASE MOLDING (I) to the BOTTOM (H). Use
å
fi ve BLACK 1-1/8" PAN HEAD SCREWS (9S).
NOTE: Do not over tighten the SCREWS (9S) into the BOTTOM.
å
Fasten the BASE MOLDINGS (J and K) to the BOTTOM (H). Use
å
four BLACK 2-1/4" FLAT HEAD SCREWS (26S)
through the BASE MOLDINGS, through the
BOTTOM, and into the ENDS (A and B).
BLACK 1-1/8" PAN HEAD SCREW
(5 used in this step)
Unfi nished surface
26S
9S
K
B
BLACK 2-1/4" FLAT HEAD SCREW
I
H
26S
(4 used in this step)
Unfi nished surface
J
A