Publicidad
Idiomas disponibles
Idiomas disponibles
7.2 STOW THE MACHINE
• Remove the battery pack before you store the charger or disconnect the charger.
8. TROUBLESHOOTING
PROBLEM
Charger doesn't
work. Charger shows
defective mode. (LED
flashes Red)
Charger doesn't
work. Charger shows
evaluation mode (LED
indicates Red solid
ON).
9. TECHNICAL DATA
Model
29972
Voltage 24 V
Input
120V AC 50/60Hz, 0.5A
Max
Output
24V DC 0.5A
Model
CAG801 /
CAG812/2903102 / 29862
Voltage 24 V
Input
120V AC 50/60Hz, 1A Max
Output
24V DC 2A
POSSIBLE CAUSE
Battery pack or
charger is defective
or there is a bad
connection between
the battery pack and
charger.
Battery pack is either
too hot, or too cold.
7
SOLUTION
Try to remove and reinsert the
battery pack in the charger.
Try charging a different battery
pack.
Unplug the charger and wait
until the red LED goes out,
then reconnect the plug to the
power supply.
Allow the battery pack to reach
normal temperature. Charging
will begin when the battery
pack returns to 3°C-47°C
(37°F-117°F).
Model
CAG817
Voltage 24 V
Input
120V AC 50/60Hz, 2A Max
Output
24V DC 4A
Model
2978602
Voltage 24 V
Input
120V AC 50/60Hz, 1.5A
Max
Output
24V DC 2A
EN
Publicidad
