Publicidad
Idiomas disponibles
Idiomas disponibles
SPECIFICATION
Model:
Voltage:
Frequency:
Power:
Product Dimensions:
Net Weight:
Please Note: A minimum safety distance of 100cm / 3 feet should always be left in front of
the heater. Do not place any objects, including furniture and clothes close to the heater.
SET UP - PARTS SUPPLIED
Ensure you have all the pieces listed. Do not proceed with set up and assembly of the heater
if any components are missing.
A. 4 pcs explosion screws (M6*60mm)
B. 4 pcs cross-recessed hex screws (M6*10mm)
C. 2 pcs hex screws (M6*12mm)
D. 4 pcs hex nuts (M6)
E. 8 pcs flat washers (M6)
F.
8 pcs split lock washers (M5)
G. 2 pcs wing nuts (M6)
H. 4 pcs L shape brackets
3 | English
PB-H16
220-240V ~
50/60 Hz
2000W Max
66*10.5*7.2 CM
1.7 KG
SET UP - EQUIPMENT REQUIRED
Note: some equipment may vary based on the assembly space
•
Phillips screw driver
•
8mm spanner
•
10mm spanner
•
Drill & masonry drill bit (8mm diameter).
•
Ladder
•
Hammer
•
Pen or marker
•
Ruler
SET UP & FIRST USE
Estimated Assembly Time: 30 minutes
Batteries: 2 x AAA batteries required. Not included.
IP 65 Approved when used with IP65 rated socket.
IMPORTANT: When drilling into walls always check that there are no hidden wires or pipes.
Ensure that the screws and wall plugs being used are suitable for supporting the unit to be
installed. If you are unsure it is recommended you contact a suitable qualified tradesperson.
Set up the heater outside, or in a large open area and well away from any obstructions such
as tree branches.
English | 4
Publicidad
