Publicidad
Idiomas disponibles
Idiomas disponibles
Ensure the heater is not facing the ceiling or inflammable substances.
NOTE: Two dark points may appear on the surface of the heating elements during the first
few minutes after the heater is turned on. This is normal and will not affect the performance
of the heater.
ASSEMBLING INSTRUCTIONS
WARNING
•
The heater should always be installed horizontally, only using the mounting brackets
supplied.
•
Ensure the supply cable is well mounted and that it does not touch the reflector on the
heater.
•
Ensure the supply cable does not trail in front of the heater while it is in operation.
•
The supply cable can be fixed to the metal mounting bracket behind the heater with
plastic zip ties.
5 | English
HOW TO ASSEMBLE THE UNIT
Step 1: Connect 2 L brackets (H) to the heater as shown. Do this using a Phillips screwdriver
with 4 components of B, E & F (see order pictured).
Step 2: With remaining L brackets (H) connect explosion screws as shown. This can be done
by hand, using components (A, D, E, F).
English | 6
Publicidad
