Publicidad
Idiomas disponibles
Idiomas disponibles
U174, 5-PIN XLR, AND 6-PIN LEMO
5-pin XLR and 6-pin Lemo aircraft connectors provide the headset with both
aircraft power and intercom audio. U174 connectors provide the headset with only
intercom audio.
Connect to the aircraft
1. Align the connector with the socket on the aircraft control panel, matching the
narrow bar on the connector with the slot in the socket.
2. Firmly insert the connector into the aircraft control panel.
U174
Disconnect from the aircraft (U174 and 5-pin XLR)
1. Press the button/latch on the aircraft control panel to release the connector,
if necessary.
2. Gently pull back to remove the connector from the aircraft control panel.
Disconnect from the aircraft (6-pin Lemo)
1. Pull back on the sleeve near the end of the connector.
CAUTION: You must pull back on the sleeve before you pull out the connector.
Forcing the connector out will damage the cable and/or the aircraft
control panel.
2. Continue gently pulling back to remove the connector from the aircraft
control panel.
A IRCR A F T CO N NE C TO RS
5-pin XLR
U174
|
3 5
5-pin XLR
E N G
6-pin Lemo
Publicidad
