Descargar Imprimir esta página

Teac VRDS-701 Manual Del Usuario página 17

Publicidad

Idiomas disponibles

Idiomas disponibles

PCM 32kHz
PCM 44.1kHz
PCM 48kHz
PCM 88.2kHz
PCM 96kHz
PCM 128kHz
PCM 176.4kHz
PCM 192kHz
PCM 256kHz
PCM 352.8kHz
PCM 384kHz
DSD 2.8MHz
DSD 5.6MHz
DSD 11.2MHz
DSD 22.5MHz
These show the input signal type and sampling frequency.
Playback format information screen
Press the INFO button on the remote control during playback to
show playback format information.
o The input signal and playback signal displays will be the same
when the upconversion setting is "OFF".
Example when the playback source is USB, COAX or OPT ("8×
Fs" upconversion setting)
Input signal
format
PCM
44. 1kHz
Input signal sampling
frequency
Volume display
Two types of volume can be shown: STEP and dB.
This is set by the VOLUME TYPE setting (page 27).
The volume setting shown will be enlarged when you turn this
unit's VOLUME knob.
VOLUME TYPE set to "STEP (0-100)"
Display example
VOL.
The maximum volume level is 100 and the minimum level is
0. Before connecting headphones, set the VOLUME knob to its
minimum value (0). Failure to do so might cause sudden loud
noises, which could damage headphones, harm hearing or result
in other trouble.
Playback signal format
PCM
352.8kHz
Playback sampling
frequency
36
VOLUME TYPE set to "dB"
Display example
VOL.
The maximum volume level is +24  dB and the minimum level
is −∞  dB (negative infinity). Before connecting headphones, set
the VOLUME knob to its minimum value (−∞  dB). Failure to do
so might cause sudden loud noises, which could damage head-
phones, harm hearing or result in other trouble.
The set output level is shown when LINE OUT LEVEL is set to "FIXED
0dB" or "FIXED +6dB".
Example when VOLUME TYPE set to "dB"
USB
o If VOLUME TYPE is set to "STEP (0-100)", "VOL. 86" will be shown
when set to "FIXED 0dB" and "VOL. 90" will be shown when set to
"FIXED +6dB".
When LINE OUT LEVEL is set to "OFF", "VOL. 0" or "−∞ dB" will be
shown.
Example when VOLUME TYPE set to "dB"
USB
When LINE OUT LEVEL is set to FIXED or OFF
Turning the VOLUME knob will cause the following to be displayed.
LINE OUT LEVEL set to FIXED
VOL.
LINE OUT LEVEL set to OFF
VOL.
-62
.0dB
+ 0.0
dB
− ∞
dB
FIXED
OFF
EN
17

Publicidad

loading