Publicidad
Powering On/Off
•
Open the charging case, the earbuds will automatically power on.
•
To power off, place the earbuds into the charging case and close it.
ON
•
The earbuds will automatically power off after 10 minutes if no device is
connected.
•
To manually power on, press and hold the multi-function button on both
earbuds for 3 seconds.
•
To manually power off, press and hold the multi-function button on either
earbud for 8 seconds.
Bluetooth Pairing
1. Open the charging case, the earbuds will automatically enter Bluetooth pairing mode.
•
The LED indicator on the charging case will flash white.
2. Select "Soundcore Life P2i" on your device's Bluetooth list to connect.
•
When successfully connected, the LED indicator on the charging case will
turn off.
1
•
When earbuds are out of the charging case and powered off, to manually
enter Bluetooth pairing mode, press and hold the multi-function button on
both earbuds for 3 seconds.
•
Each time you power on your Soundcore earbuds, they will automatically
connect to your last successfully connected device if available within the
Bluetooth range.
1
OFF
PAIRING
CONNECTED
2
Soundcore
Life P2i
Soundcore
Life P2i
2
02 EN
Publicidad
