Publicidad
Idiomas disponibles
Idiomas disponibles
4. Mounting / 5. Faults
Since the electrical connection is made of plastic, it is necessary to use a cable with the following shield connection:
Pin assignment
→ For pin
assignments, see chapter 3.5 "Labelling, safety marks"
→
For auxiliary power, see chapter 3.5 "Labelling, safety marks"
5. Faults
CAUTION!
Physical injuries and damage to property and the environment
If faults cannot be eliminated by means of the listed measures, the pressure sensor must be taken out
of operation immediately.
▶
Ensure that pressure or signal is no longer present and protect against accidental commissioning.
▶
Contact the manufacturer.
▶
If a return is needed, please follow the instructions given in chapter 7.2 "Return".
For contact details, see chapter 1 "General information" or the back page of the operating instructions.
In the event of any faults, first check whether the pressure sensor is mounted correctly, mechanically and electrically.
WIKA operating instructions pressure sensor, model MH-4-CAN
EN
9
Publicidad
