Publicidad
Idiomas disponibles
Idiomas disponibles
Fill the unit with water
1. Lift the pivot lid and use a pitcher
or bucket to pour water into the
reservoir. A "FULL" sticker on each
side of the cabinet indicates the
highest level of water acceptable.
2. Total capacity is 4.7 gallons.
Do not overfill.
Locate Place for Your Humidifier
1. Once the unit is assembled and filled, position it at
least 2 inches from the wall to ensure the humidistat
has adequate air to sample. See "Tips for Position-
ing" in the margin.
2. Use a bubble level to ensure the unit is level for
proper function.
OPERATION
Speed
Turn On and Set Controls
Rotate the left knob clockwise to turn the unit on.
1.
The power light will illuminate. Continue turning the
knob to set the fan speed to low, medium or high.
Set the humidity level by rotating the right hand
2.
knob. The level of humidity increases as you turn
the knob further to the right. Note the chart in the
margin as a guide.
The automatic humidistat feature will turn the fan
3.
on or off to maintain the selected humidity level.
When the unit is almost empty, the Refill light will
4.
illuminate. Refill the unit with cool, clean water.
• To start, set the humidity level between 45-50%. Adjust to desired level after get-
ting a baseline reading.
• It may take up to 48 hours of operation to see overall humidity levels change.
• CDC tests show that humidity levels of 43% greatly reduce the ability of flu virus
to spread.
• We recommend using high speeds during the day to spread humidified air rapidly,
and using low speed for nighttime use.
FOR HELP, CALL 1.800.547.3888 OR VISIT AIRCAREPRODUCTS.COM
Power
Refill
Tips for Humidity Setting
Humidity
7
Tips for Positioning:
• On level surface near an
inside wall.
• Centrally located so hu-
midified air flows through-
out the home.
• At least two inches from
the wall.
• Not next to the thermostat
or hot air vent.
• Not by a window (to avoid
condensation)
Publicidad
